AMI Advanced Machine Interface - Hardware Specifications
ADNC Hookup Typical RS232 Hookup
CNC Serial Parameters(J7):
Stop bits 1 or 2
Data bits 7 or 8
Parity Odd, even None.

CNC Baud Rates (J7):
300, 600, 1200, 2400, 4800, 9600, 19200

Additional AMI Features:
Add Leader/Trailer.
EIA Code translation.
Drip Feed mode.
Tape loop mode.
Memory Lock.
Programmable Timing.

Supported ATERM Features:
Remote file request.
Erase Memory.
File in AMI memory information.
View NC program in memory.
Search and Run from NC block.

Host Serial Parameters:
Automatically controlled.

Reader Types
Acuraread
Addmaster
Decitek
Digitronix
EECO
Fanuc
GE
Ghilmetti
GNT
Oktronics
OKI
Remex
Ricom
SanoDenki
SloSyn
Tally

Punch Types
Facit,Remex

   Host Baud Rates (J3):
600, 1200, 2400, 4800,
9600, 19200, 38,400

Host Protocols
RS491, ADNC
XON/XOFF
Mazak

Power MAX
+5VDC Regulated <500ma
+9VDC Unregulated <500ma

Physical
Size 4.5" x 7" x 1.25"

MTBF
50,000 Operationg Hours

Operating Temperature
0 - 50 C
Connectors:
J2 ATERM - hand held terminal RJ14
J3 Host port RS232 and RS422 DB9S Female
J4 Host port RS232 and RS422 DB9P Male
J5 Reader parallel emulation port DB25P male
J6 Punch parallel emulation port DB25S female
J7 Serial CNC reader/punch DB9S female
TB1 Twin Screw Terminals - DC power		 Ordering Information
PN 100001-128 128K Memory
PN 100001-512 512K Memory
PN 100001-2M 2 M Memory 		 

1813 East Dyer Road, Suite 410
Santa Ana CA 92705 USA
(949) 252-1055 Tel
www.adrco.com