LanTapÒ OPEN Ethernet DNC Networks

ADR is meeting the needs of manufacturers working with Ethernet factory networks. LanTap provides a complete stand-alone connectivity solution. Built on a highly integrated micro-controller and single-chip Ethernet controller, LanTap simply puts your CNC on your company computer network and gives you direct access to it in the most benefical ways, economically
  • Provides FTP Client access by CNC
  • Supports Bi-directional transfers with CNC's existing RS-232 port
  • Stand-alone Unit - No Dedicated PC Required
  • FAST! Offers 115,200 characters per second throughout

Access FTP Server from CNC, Fast
The FTP Server from ADR is the fastest way to create a powerful FTP DNC Distributed Numerical Control system. LanTap is ready to run as an independent node anywhere on your network. Locate it where you need it most, with no dedicated PC exposed to the shop environment. Add more LanTaps at any time as your DNC needs grow. LanTap is fully compatible with 10baseT networks.

Bi-directional Communications Server
LanTap supports bi-directional transfers. To send a file to a CNC, your CNC outputs a command program specifying the file on the FTP server. LanTap is always ready to receive a file from your CNC, when you "punch" or "save" a program in the CNC's memory it is automatically saved in a special folder assigned to the CNC by FTP.

Easy to Install, Widely Compatible
LanTap's easy 3 step installation makes it a snap to install. Attach your network cabling. Plug in your CNC's RS-232 cable. Install the software. And that's all. No hardware switch settings or complex network commands required.

Specifications:
Ethernet: 10 megabits/sec - IEEE 802.3 - RJ45
Network Protocols: TCP/IP, CSMA/CD
Outputs: RS232: Two DB9S Terminal: RJ12 connector
Memory: 512Kbytes RAM, 512Kbytes FlashROM
Power Supply: 6.4 - 24V
Dimensions: 1" x 4" x 7" Weight: 16oz
  • Two versions - FTP Client & Comm Server
  • Two RS-232 ports
  • Fast installation - takes only minutes
  • Error-free Transmissions Stand-alone unit - No dedicated PC required
  • Supports Hardware handshaking
  • 10BaseT, RJ45 network connector
  • 10Mbps Network Data Transfer Rate
  • Integrates seamlessly with existing software
  • 512KB RAM - buffers data for fast, continuous data transfer
  • Fast 115,200 baudrates
  • Housed in a factory environment secure metal housing
  • Diagnostic LED Indicators
  • Connector for ATerm - handheld terminal
    Microsoft Windows 95, Windows 98, Windows NT
    ADR Part no: 500100

    1813 East Dyer Road
    Suite 412
    Santa Ana CA 92705
    TEL (714)505-4004
    FAX (714)252-1490
    www.adrco.com